FR-PE  6001  (阻燃聚乙烯)

Characteristic :  特 性 :
? Low Density ? 低比重
? Superior Melt Flow Index
? High Notched Impact Strength, No Separating  ? 高流動性，高缺口沖擊強度，無析出
Application :  主要用途:
? Pins of Christmas Tree  ? 圣誕樹松枝
Properties 特 性  Test Method
測試標準 Units
單位 Data
數據
Specific Gravity 密度 D-792 g/cm3  0.97
Mould Shrinkage 收縮率 D-955 % ---
Melt Index (230℃/2.16kgs) 熔融指數 D-1238 g/10min 60
Heat Deflection Temp (0.45Mpa) 熱變形溫度 D-648 ℃ 47
Tensile Strength, yield 拉伸屈服強度 D-638 Mpa 8
Break Elongation 斷裂伸長率 D-638 % 186
Flexural Strength 彎曲強度 D-790 Mpa 6
Flexural Modulus 彎曲模量 D-790 Mpa 118
Izod Impact Strength, notched 缺口沖擊強度 D-256 J/m 311
Flammability 阻燃性 UL94
(Equivalent) 1.5mm V2
   3.0mm V2
Remark : The data are intended as a general guide only, makes no guarantee of results and assumes no obligation or liability.
         以上數據為產品典型值，但不作為質保承諾。
Molding Recommendation  注塑工藝 :
Pre-dry Condition
干燥溫度/時間 Injection Temperature
注塑溫度 Injection Speed
注塑速度 Mold Temperature
模溫
80℃(2hours) 155-175℃ 30-60% 40-70℃
Remark :  The molding data is just for reference, the parameter should be changed under difference of mold design,
        product shot volume, and the time of material residual.