Characteristic :  特 性 :
? Flame Retardant, Non- halogen ? 高阻燃性能，非鹵阻燃
? High Flow Properties，High Rigidity, High Heat resistance
? Meet the requirements of RoHS and PAHs ? 加工流動性良好，高剛性，高耐熱

? 符合RoHS指令及PAHs要求

Application :  主要用途:
? E/E Appliance ? 電子、電氣產品
Properties 特 性  Test Method
測試標準 Units
單位 Data
數據
Specific Gravity 密度 D-792 g/cm3 1.07
Mould Shrinkage 收縮率 D-955 % 1.0-1.2
Melt Index (200℃/2.16kgs) 熔融指數 D-1238 g/10min 8
Heat Deflection Temp (0.45Mpa) 熱變形溫度 D-648 ℃ 135
Tensile Strength, yield 拉伸屈服強度 D-638 Mpa 25
Break Elongation 斷裂伸長率 D-638 % 48
Flexural Strength 彎曲強度 D-790 Mpa 40
Flexural Modulus 彎曲模量 D-790 Mpa 2450
Izod Impact Strength, notched 缺口沖擊強度 D-256 J/m 20
Flammability 阻燃性 UL94 0.8mm V0
    SC-0
Remark : The data are intended as a general guide only, makes no guarantee of results and assumes no obligation or liability.
         以上數據為產品典型值，但不作為質保承諾。
Molding Recommendation  注塑工藝 :
Pre-dry Condition
干燥溫度/時間 Injection Temperature
注塑溫度 Injection Speed
注塑速度 Mold Temperature
模溫
90℃(2hours) 190-180℃ 50-80% 40-70℃
Remark :  The molding data is just for reference, the parameter should be changed under difference of mold design,