圖中所示量規塞處于檢驗狀態。當柱塞處于靜止狀態時,W面應比X面縮進更深些。
Reference 尺寸符號 |
Dimension/尺寸(mm) |
Tolerance/公差(mm) |
d |
26.45 |
+0.03/-0.0 |
H |
14 |
±0.1 |
M |
13 |
±0.1 |
O |
23.0 |
±0.03 |
S |
8.5 |
+0.01/-0.0 |
V |
1.5 |
+0.02/-0.0 |
Purpose目的:
To check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps.
檢驗成品燈上E27燈頭尺寸S1的最大值和最小值。
Testing 測試方法:
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface “W” shall be co-planar with or project beyond surface “X” but it shall not project beyond surface “Y”.
當成品燈的燈頭完全插入量規時,塞柱的W面應與X面共面或凸出X面,但不得凸出Y面。