ASTM F683 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
ASTM F683 管道和機械隔熱的選定和應用實施規程
This practice provides the design and dimensional details required for the proper selection of the type of, and correct installation procedures for, thermal insulation materials suitable for use on piping, machinery, and equipment employed in nonnuclear shipboard applications. The insulation and lagging requirements for the removable covers of valves, fittings, flanges, and machinery or equipment, as well as the requirements for thermal insulating tape, are also detailed completely.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This practice provides guidance in the selection of types and thicknesses of thermal insulation materials for piping, machinery, and equipment for nonnuclear shipboard applications. Methods and materials for installation, including lagging, are also detailed.
1.2 Supplemental requirements and exceptions to the requirements discussed herein for ships of the U.S. Navy are included in Supplementary Requirements S1.
1.3 Asbestos or asbestos-containing materials shall not be used.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separatelyASTM Standards
A167 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
C168 Terminology Relating to Thermal Insulation
C195 Specification for Mineral Fiber Thermal Insulating Cement
C449/C449M Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C533 Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534 Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C547 Specification for Mineral Fiber Pipe Insulation
C552 Specification for Cellular Glass Thermal Insulation
C553 Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C610 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C612 Specification for Mineral Fiber Block and Board Thermal Insulation
C680 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C892 Specification for High-Temperature Fiber Blanket Thermal Insulation
C1482 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
D962 Specification for Aluminum Powder and Paste Pigments for Paints
F1138 Specification for Spray Shields for Mechanical Joints
Federal Specifications
TT-P-28 Paint, Aluminum, Heat Resisting (1200F)
Military Specifications
MIL-STD-2118 Trap, Steam, Angle, Thermostatic
Other Documents
USCGTypeApproval164. IMO FTP Code Annex 1, Parts 2 and 5
Drawings, NAVSHIP
804-5959212 Machinery Insulation, Installation Details
NAVSEA
NavalShipsTechnicalM Chapter 635--Thermal, Fire, and Acoustic Insulation
Index Terms
insulation; lagging; machinery insulation; marine; piping insulation; ship; shipboard insulation; thermal insulation; vessel; Block and board thermal insulation; Installation--marine applications; Machinery (for ships); Mineral fiber insulation; Nonnuclear applications; Pipe thermal insulation; Polyimide insulation; Shipboard insulating materials; Shipbuilding steel pipe materials; Thermal insulating materials (pipe) ;
ASTM F683 管道和機械隔熱的選定和應用實施規程
This practice provides the design and dimensional details required for the proper selection of the type of, and correct installation procedures for, thermal insulation materials suitable for use on piping, machinery, and equipment employed in nonnuclear shipboard applications. The insulation and lagging requirements for the removable covers of valves, fittings, flanges, and machinery or equipment, as well as the requirements for thermal insulating tape, are also detailed completely.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This practice provides guidance in the selection of types and thicknesses of thermal insulation materials for piping, machinery, and equipment for nonnuclear shipboard applications. Methods and materials for installation, including lagging, are also detailed.
1.2 Supplemental requirements and exceptions to the requirements discussed herein for ships of the U.S. Navy are included in Supplementary Requirements S1.
1.3 Asbestos or asbestos-containing materials shall not be used.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separatelyASTM Standards
A167 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
C168 Terminology Relating to Thermal Insulation
C195 Specification for Mineral Fiber Thermal Insulating Cement
C449/C449M Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C533 Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534 Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C547 Specification for Mineral Fiber Pipe Insulation
C552 Specification for Cellular Glass Thermal Insulation
C553 Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C610 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C612 Specification for Mineral Fiber Block and Board Thermal Insulation
C680 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C892 Specification for High-Temperature Fiber Blanket Thermal Insulation
C1482 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
D962 Specification for Aluminum Powder and Paste Pigments for Paints
F1138 Specification for Spray Shields for Mechanical Joints
Federal Specifications
TT-P-28 Paint, Aluminum, Heat Resisting (1200F)
Military Specifications
MIL-STD-2118 Trap, Steam, Angle, Thermostatic
Other Documents
USCGTypeApproval164. IMO FTP Code Annex 1, Parts 2 and 5
Drawings, NAVSHIP
804-5959212 Machinery Insulation, Installation Details
NAVSEA
NavalShipsTechnicalM Chapter 635--Thermal, Fire, and Acoustic Insulation
Index Terms
insulation; lagging; machinery insulation; marine; piping insulation; ship; shipboard insulation; thermal insulation; vessel; Block and board thermal insulation; Installation--marine applications; Machinery (for ships); Mineral fiber insulation; Nonnuclear applications; Pipe thermal insulation; Polyimide insulation; Shipboard insulating materials; Shipbuilding steel pipe materials; Thermal insulating materials (pipe) ;