ASTM D3144 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3144電絕緣用交聯聚偏氟乙烯熱收縮管的標準規范
This specification covers semirigid, flame-retardant, crosslinked poly(vinylidene fluoride) heat-shrinkable tubing for electrical insulation purposes. It is supplied in an expanded form and will shrink to its extruded diameter when heated. The tubing shall be extruded, crosslinked, and then expanded to the required dimensions. The material shall conform to the chemical property requirements specified. Every lot of material manufactured shall be tested for restricted shrinkage, heat shock, tensile strength, and elongation to conform to the mechanical, thermal, electrical requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers semirigid, flame-retardant, crosslinked poly(vinylidene fluoride) heat-shrinkable tubing for electrical insulation purposes. It is supplied in an expanded form and will shrink to its extruded diameter when heated.
Note 1
This standard is similar but not identical to IEC 60684-3-228.
1.2 The values stated in inch-pound units are to be regarded as the standard, except temperature which shall be stated in degrees Celsius. Values in parentheses are for information only.
2. Referenced Documents (purchase separately)
ASTM Standards
D910 Specification for Aviation Gasolines
D1711 Terminology Relating to Electrical Insulation
D2671 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
E176 Terminology of Fire Standards
D1711 Terminology Relating to Electrical Insulation
D2671 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
E176 Terminology of Fire Standards
Military Standards
MIL-A-8243 Anti-Icing and Deicing--Defrosting Fluid
Federal Standards
SS-S-550 Sodium Chloride, Technical, for Water-Softening Units
IEC Standards
60684–3– Flexible insulating sleeving, Part 3, Sheet 228: Heat-shrinkable, semi-rigid, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
Index Terms
crosslinked poly(vinylidene fluoride) heat-shrinkable tubing; electrical insulation; heat-shrinkable tubing; poly(vinylidene fluoride);
