ASTM C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM C647膠合輔料和涂覆品性能及試驗標準指南
Each of the properties listed should be considered in selecting materials for specific projects. A list of the selected properties with limiting values assigned will form a part of the product specification.
All of the properties may not be pertinent in any specific situation, and all of the tests outlined may not be required. A condition to any specification must be an evaluation of the proposed use to determine which properties may be required.
Membrane reinforcements are frequently specified and used with mastics and coatings. Service properties of such systems of finishes may be different from the unreinforced finishes; therefore, it is essential to test specimens of the reinforced system.
1. Scope
1.1 This guide identifies properties of mastics and coating finishes characterizing their performance as finishes for thermal insulation.
1.2 These properties relate to application and service. Each property is defined, and its significance and suggested test methods are described.
1.3 The properties appear in the following order in this guide.
|
|
Paragraph
|
|
Application Properties
|
6
|
|
Consistency
|
6.1
|
|
Coverage
|
6.2
|
|
Build
|
6.3
|
|
Wet Flammability
|
6.4
|
|
Toxicity
|
6.5
|
|
Temperature and Humidity Range
|
6.6
|
|
Surface Wetting and Adhesion
|
6.7
|
|
Gap Filling and Bridging
|
6.8
|
|
Sizing and Sealing
|
6.9
|
|
Corrosion or Solvent Attack
|
6.10
|
|
Drying Time and Curing Time
|
6.11
|
|
Shrinkage
|
6.12
|
|
Storage Stability
|
6.13
|
|
Freeze-Thaw Stability
|
6.14
|
|
Service Properties
|
7
|
|
Specimen Preparation
|
7.1
|
|
Outdoor Durability
|
7.2
|
|
Environmental Resistance
|
7.3
|
|
Temperature Limits
|
7.3.1
|
|
Chemicals and Water Resistance
|
7.3.2
|
|
Mold and Mildew Resistance
|
7.3.3
|
|
Surface Flammability
|
7.4
|
|
Water-Vapor Transmission Rate
|
7.5
|
|
Adhesion
|
7.6
|
|
Damage Resistance
|
7.7
|
|
Impact Resistance
|
7.7.1
|
|
Abrasion Resistance
|
7.7.2
|
|
Stress Resistance
|
7.8
|
|
Flexure
|
7.8.1
|
|
Elongation
|
7.8.2
|
|
Color
|
7.9
|
|
Odor
|
7.10
|
|
Other Properties
|
8
|
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately)
ASTM Standards
C168 Terminology Relating to Thermal Insulation
C419 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C461 Test Methods for Mastics and Coatings Used With Thermal Insulation
C488 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C681 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C733 Test Method for Volume Shrinkage of Latex Sealants
C755 Practice for Selection of Water Vapor Retarders for Thermal Insulation
C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D56 Test Method for Flash Point by Tag Closed Cup Tester
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D529 Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
D543 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D562 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
D638 Test Method for Tensile Properties of Plastics
D658 Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive
D747 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D903 Test Method for Peel or Stripping Strength of Adhesive Bonds
D968 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1310 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1640 Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1823 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1849 Test Method for Package Stability of Paint
D2196 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
D2243 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2354 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2453 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2485 Test Methods for Evaluating Coatings For High Temperature Service
D2507 Terminology of Rheological Properties of Gelled Rocket Propellants
D2939 Test Methods for Emulsified Bitumens Used as Protective Coatings
D3134 Practice for Establishing Color and Gloss Tolerances
D3274 Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
D4339 Test Method for Determination of the Odor of Adhesives
E84 Test Method for Surface Burning Characteristics of Building Materials
E96/E96M Test Methods for Water Vapor Transmission of Materials
E162 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E659 Test Method for Autoignition Temperature of Liquid Chemicals
G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G23 Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Discontinued 2001)
C419 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C461 Test Methods for Mastics and Coatings Used With Thermal Insulation
C488 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C681 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C733 Test Method for Volume Shrinkage of Latex Sealants
C755 Practice for Selection of Water Vapor Retarders for Thermal Insulation
C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D56 Test Method for Flash Point by Tag Closed Cup Tester
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D529 Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
D543 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D562 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
D638 Test Method for Tensile Properties of Plastics
D658 Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive
D747 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D903 Test Method for Peel or Stripping Strength of Adhesive Bonds
D968 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1310 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1640 Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1823 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1849 Test Method for Package Stability of Paint
D2196 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
D2243 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2354 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2453 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2485 Test Methods for Evaluating Coatings For High Temperature Service
D2507 Terminology of Rheological Properties of Gelled Rocket Propellants
D2939 Test Methods for Emulsified Bitumens Used as Protective Coatings
D3134 Practice for Establishing Color and Gloss Tolerances
D3274 Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
D4339 Test Method for Determination of the Odor of Adhesives
E84 Test Method for Surface Burning Characteristics of Building Materials
E96/E96M Test Methods for Water Vapor Transmission of Materials
E162 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E659 Test Method for Autoignition Temperature of Liquid Chemicals
G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G23 Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Discontinued 2001)
Index Terms
application properties; mastic coating; service properties; Bituminous mastic coatings (for thermal insulating materials); Coatings (thermal insulating materials); Thermal insulating materials (mastic coatings);
