ASTM D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM D5759有潛在用途煤飛灰和凈煤燃燒飛灰特性表征標準導則
This guide provides guidance for the characterization of coal fly ash or clean coal combustion fly ash for potential uses in which absorption, cementitious activity, pozzolanic activity, pH adjustment, heat rise, or stabilization and solidification properties may be desired.
1. Scope
1.1 This guide recommends standards for the characterization of fly ash from the combustion of coal, fly ash from coal combusted in the presence of alkaline materials, and fly ash from combusted coal in which the flue gases have been treated with alkaline materials in the presence of the fly ash.
1.2 This guide provides recommended and optional test methods for fly ash evaluation. Acceptance criteria can be negotiated between the producer and the user according to the potential end use.
1.3 The coal fly ash and clean coal combustion fly ash of this guide do not include the following:
1.3.1 Dusts from kilns producing products such as lime, portland cement, activated clays, etc.;
1.3.2 By-products of flue gas desulflurization that are not collected with the primary fly ash removal equipment such as the baghouse or electrostatic precipitator; and
1.3.3 Fly ash or other combustion products derived from the burning of waste; municipal, industrial, or commercial garbage; sewage sludge or other refuse, or both; derived fuels; wood; wood waste products; rice hulls; agriculture waste; or other non-coal fuels or other such fuels blended with coal, or some combination thereof.
1.4 Fly ash may contain some trace elements that may affect performance or potential end use.
1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
C22 Specification for Gypsum
C25 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C51 Terminology Relating to Lime and Limestone (As Used by the Industry)
C109 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or 50-mm Cube Specimens)
C110 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114 Test Methods for Chemical Analysis of Hydraulic Cement
C150 Specification for Portland Cement
C191 Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
C311 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
C400 Test Method for Testing Quicklime and Hydrated Lime for Neutralization of Waste Acid
C593 Specification for Fly Ash and Other Pozzolans for Use with Lime
C595 Specification for Blended Hydraulic Cements
C602 Specification for Agricultural Liming Materials
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete
D546 Test Method for Sieve Analysis of Mineral Filler for Road and Paving Materials
D1973 Guide for Design of a Linear System for Containment of Wastes
D2795 Method for Analysis of Coal and Coke Ash
D3178 Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
D3682 Test Method for Major and Minor Elements in Coal and Coke Ash by the Atomic Absorption Method
D3683 Test Method for Trace Elements in Coal and Coke Ash by the Atomic Absorption Method
D4326 Test Method for Major and Minor Elements in Coal and Coke by X-Ray Fluorescence
D5239 Practice for Characterizing Fly Ash for Use in Soil Stabilization
E1266 Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
C25 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C51 Terminology Relating to Lime and Limestone (As Used by the Industry)
C109 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or 50-mm Cube Specimens)
C110 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114 Test Methods for Chemical Analysis of Hydraulic Cement
C150 Specification for Portland Cement
C191 Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
C311 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
C400 Test Method for Testing Quicklime and Hydrated Lime for Neutralization of Waste Acid
C593 Specification for Fly Ash and Other Pozzolans for Use with Lime
C595 Specification for Blended Hydraulic Cements
C602 Specification for Agricultural Liming Materials
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete
D546 Test Method for Sieve Analysis of Mineral Filler for Road and Paving Materials
D1973 Guide for Design of a Linear System for Containment of Wastes
D2795 Method for Analysis of Coal and Coke Ash
D3178 Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
D3682 Test Method for Major and Minor Elements in Coal and Coke Ash by the Atomic Absorption Method
D3683 Test Method for Trace Elements in Coal and Coke Ash by the Atomic Absorption Method
D4326 Test Method for Major and Minor Elements in Coal and Coke by X-Ray Fluorescence
D5239 Practice for Characterizing Fly Ash for Use in Soil Stabilization
E1266 Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
Other Document
USEPAMethod9100-SW84 Falling Head or Constand Head
Index Terms
characterization of clean coal combustion fly ash; characterization of clean coal fly ash; characterization of coal fly ash; fly ash for potential use;
