ASTM E1805 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E1805重力法測定銅濃縮物中金試金分析標準試驗方法
In the metallurgical process used in the mining industries, gold is often carried along with copper during the flotation concentration process. Metallurgical accounting, process control, and concentrate evaluation procedures for this type of material depend on an accurate, precise measurement of the gold in the copper concentrate. This test method is intended to be a reference method for metallurgical laboratories and a referee method to settle disputes in commercial transactions.
It is assumed that all who use this test method will be trained analysts capable of performing common laboratory operations skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E 882.
1. Scope
1.1 This test method is for the determination of gold in copper concentrates in the concentration range from 0.2 to 17 g/g (0.007 to 0.500 Troy oz/short ton). Note 1 - The lower scope limit is set in accordance with Practice E 1601.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 11.3.1, 11.5.4, and 11.6.5.
2. Referenced Documents (purchase separately)
ASTM Standards
D1193 Specification for Reagent Water
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E1601 Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Index Terms
copper concentrates; fire assay; gold content;
ASTM E1805重力法測定銅濃縮物中金試金分析標準試驗方法
In the metallurgical process used in the mining industries, gold is often carried along with copper during the flotation concentration process. Metallurgical accounting, process control, and concentrate evaluation procedures for this type of material depend on an accurate, precise measurement of the gold in the copper concentrate. This test method is intended to be a reference method for metallurgical laboratories and a referee method to settle disputes in commercial transactions.
It is assumed that all who use this test method will be trained analysts capable of performing common laboratory operations skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E 882.
1. Scope
1.1 This test method is for the determination of gold in copper concentrates in the concentration range from 0.2 to 17 g/g (0.007 to 0.500 Troy oz/short ton). Note 1 - The lower scope limit is set in accordance with Practice E 1601.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 11.3.1, 11.5.4, and 11.6.5.
2. Referenced Documents (purchase separately)
ASTM Standards
D1193 Specification for Reagent Water
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E1601 Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Index Terms
copper concentrates; fire assay; gold content;
