ASTM E2323 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
ASTM E2323用氧氣分析儀測量法計算密封絕緣玻璃裝置中的填充氣體的濃度的標準試驗方法
1. Scope
1.1 This test method covers procedures for the use of oxygen analyzers to measure the percentage of oxygen in an insulating glass unit where normal atmospheric air has been replaced with other gases such as argon, krypton, xenon, or sulfur hexafluoride (SF6). The procedure shows how to convert the measured percentage of oxygen in an insulating glass unit to the percentage of air in the unit, and subtracts the air percentage from 100 % to calculate the percentage of fill gas in the unit.
1.2 This test method does not determine the type of fill gas. It only measures the percentage of oxygen in the gas in the space between the lites of an insulating glass unit.
1.3 This test method is not applicable to insulating glass units containing open capillary/breather tubes.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately
ASTM Standards
C162 Terminology of Glass Products
C717 Terminology of Building Seals and Sealants
E631 Terminology of Building Constructions
Index Terms
fill gas; gas concentration; oxygen; oxygen analyzer; sealed insulating glass unit;