ASTM F2302 Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant
ASTM F2302耐熱防火防護服標示的標準性能規范
1. Scope
1.1 This specification provides minimum requirements for labeling protective clothing as heat and flame resistant for applications where the potential for flame contact or high heat exposure exist.
1.1.1 This specification includes requirements that define heat and flame resistance of materials used in protective clothing in a manner to limit the contribution of the clothing for causing injury to the wearer when exposed to high heat or flame.
1.1.2 This specification does not provide requirements that establish the level of protection provided by the clothing.
1.1.3 This specification does not include testing for the evaluation of the entire clothing item.
1.2 This specification does not pertain to materials and clothing that are addressed in other standards. See Appendix X1 for a list of standards for heat and flame resistant protective clothing.
1.3 This specification does not pertain to applications where the conditions of potential flame contact or heat exposure are of an extended duration and/or are of a high intensity.
Note 1—Examples include fire fighting applications, exposure to high energy electrical arcs and exposures in flash fires.
1.4 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way.
1.5 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.
1.6 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
D123 Terminology Relating to Textiles
D4391 Terminology Relating to The Burning Behavior of Textiles
D6413 Test Method for Flame Resistance of Textiles (Vertical Test)
E171 Specification for Atmospheres for Conditioning and Testing Flexible Barrier Materials
F1002 Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
F1358 Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
F1494 Terminology Relating to Protective Clothing
F1506 Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
F1891 Specification for Arc and Flame Resistant Rainwear
AATCC Standards
AATCC135 Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics
ISO Standards
ISO17493 Clothing for protection against heat and flame--Test method for convective heat resistance using a hot air circulating oven
CGSB Standards
CGSB155.22 Fireline Workwear for Forest Firefighters
NFPA Standards
NFPA2113 Standard on Selection, Care, Use and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
Index Terms
flame resistant; FR; heat resistant; protective clothing; Flame-resistant (FR) clothing/materials--specifications; Heat-resistant protective clothing; Performance--protective clothing/materials applications; Protective clothing--specifications;
ASTM F2302耐熱防火防護服標示的標準性能規范
1. Scope
1.1 This specification provides minimum requirements for labeling protective clothing as heat and flame resistant for applications where the potential for flame contact or high heat exposure exist.
1.1.1 This specification includes requirements that define heat and flame resistance of materials used in protective clothing in a manner to limit the contribution of the clothing for causing injury to the wearer when exposed to high heat or flame.
1.1.2 This specification does not provide requirements that establish the level of protection provided by the clothing.
1.1.3 This specification does not include testing for the evaluation of the entire clothing item.
1.2 This specification does not pertain to materials and clothing that are addressed in other standards. See Appendix X1 for a list of standards for heat and flame resistant protective clothing.
1.3 This specification does not pertain to applications where the conditions of potential flame contact or heat exposure are of an extended duration and/or are of a high intensity.
Note 1—Examples include fire fighting applications, exposure to high energy electrical arcs and exposures in flash fires.
1.4 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way.
1.5 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.
1.6 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
D123 Terminology Relating to Textiles
D4391 Terminology Relating to The Burning Behavior of Textiles
D6413 Test Method for Flame Resistance of Textiles (Vertical Test)
E171 Specification for Atmospheres for Conditioning and Testing Flexible Barrier Materials
F1002 Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
F1358 Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
F1494 Terminology Relating to Protective Clothing
F1506 Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
F1891 Specification for Arc and Flame Resistant Rainwear
AATCC Standards
AATCC135 Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics
ISO Standards
ISO17493 Clothing for protection against heat and flame--Test method for convective heat resistance using a hot air circulating oven
CGSB Standards
CGSB155.22 Fireline Workwear for Forest Firefighters
NFPA Standards
NFPA2113 Standard on Selection, Care, Use and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
Index Terms
flame resistant; FR; heat resistant; protective clothing; Flame-resistant (FR) clothing/materials--specifications; Heat-resistant protective clothing; Performance--protective clothing/materials applications; Protective clothing--specifications;
