ISO 48-4 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)

ISO 48-4 硫化橡膠或熱塑性橡膠.硬度的測定.第4部分:硬度計法壓痕硬度(肖氏硬度)

ISO 48-4 硫化橡膠或熱塑性橡膠.硬度的測定.第4部分—適用范圍

This document specifies a method for determining the indentation hardness (Shore hardness) of vulcanized or thermoplastic rubber using durometers with the following scales:the A scale for rubbers in the normal-hardness range; the D scale for rubbers in the high-hardness range; the AO scale for rubbers in the low-hardness range and for cellular rubbers; the AM scale for thin rubber test pieces in the normal-hardness range.

ISO 48-4 硫化橡膠或熱塑性橡膠.硬度的測定.第4部分—引用文件

ISO 48-9, Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers

ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods

ISO 48-4 硫化橡膠或熱塑性橡膠.硬度的測定.第4部分—相關標準

ASTM D2240橡膠特性的標準試驗方法.肖氏硬度/Standard Test Method for Rubber Property8212;Durometer Hardness

ISO 48-4硫化橡膠或熱塑性橡膠.硬度的測定.第4部分:硬度計法壓痕硬度(肖氏硬度)/Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)

GB/T 531.1硫化橡膠或熱塑性橡膠 壓入硬度試驗方法 第1部分_邵氏硬度計法(邵爾硬度)/Rubber , vulcanized or thermoplastic— Determination of indentation hardness — Part 1 : Duromerer method (Shore hardness)

GB/T 30308氟橡膠 通用規范和評價方法/Fluoroelastomers—General specification and procedure of evaluation

GB/T 30308

IS K6253-3硫化橡膠或熱塑性橡膠硬度測定.第3部分:硬度計法/Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method

JIS k7312熱固性聚氨酯彈性體模塑制品的物理試驗方法/Physical testing methods for molded products of thermosetting polyurethane elastomers

ISO 868塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]/Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

GB T 2411塑料和硬橡膠 使用硬度計測定壓痕硬度（邵氏硬度）/Plastics and ebonite-Determination of indentation hardness by means of a durometer(shore hardness)

DIN ISO 7619-1硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第1部分:硬度計法(肖氏硬度) /Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

AS 1683.15.2人造橡膠的測試方法 硬度計法/Methods of test for elastomers - Durometer hardness