ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分—標準名稱

ISO 3384-1 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature

ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分:恒溫下的測試

ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分—適用范圍

This part of ISO 3384 specifies two methods for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature. The counterforce can be determined either by means of a continuous-measurement system or by a discontinuous-measurement one.

ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分—引用文件

ISO 37 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests

ISO 1817, Rubber, vulcanized or thermoplastic — Determination of the effect of liquids

ISO 3601-1 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes

ISO 18899 Rubber — Guide to the calibration of test equipment

ISO 23529 Rubber — General procedures for preparing and conditioning test pieces for physical test methods

ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分—相關標準

ISO 3384-1硫化橡膠或熱塑性橡膠.壓縮應變力松弛的測定.第1部分:恒溫下的測試/Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature

GB/T 1685硫化橡膠或熱塑性橡膠 在常溫和高溫下壓縮應力松弛的測定/Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures

ASTM D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer— Determination of Force Decay (Stress Relaxation) in Compression

詳情請咨詢：廈門易朔
出自GF2022