點擊圖片查看大圖
荷蘭帝斯曼PA46 Stanyl TE250F6 特性：可電鍍，含30%玻璃纖維強化，防火阻燃(0.35mm V-0)，易脫模 自潤滑，耐高溫290℃，用于連接器等
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149
PA46 TE250F6 物性表：
| Physical | Dry | Conditioned | Unit | Test Method |
| Density | 1.68 | -- | g/cm³ | ISO 1183 |
| Density | 1680 | -- | kg/m³ | ISO 1183 2 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.1 | -- | % | |
| Flow | 0.40 | -- | % | |
| Water Absorption (Saturation) | 5.9 | -- | % | ISO 62 2 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.6 | -- | % | ISO 62 |
| Water Absorption (Equilibrium) | 1.6 | -- | % | ISO 62 2 |
| Viscosity number | 145 | -- | cm³/g | ISO 307, 1157, 1628 2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
| Tensile Modulus | ISO 527-2 | |||
| -- | 12000 | 8000 | MPa | |
| 120°C | 7500 | -- | MPa | |
| 160°C | 6200 | -- | MPa | |
| Tensile modulus | 12000 | 8000 | MPa | ISO 527-2 2 |
| Tensile Stress | ISO 527-2 | |||
| Break | 180 | 125 | MPa | |
| Break, 120°C | 105 | -- | MPa | |
| Break, 160°C | 95.0 | -- | MPa | |
| Tensile Stress (Break) | 180 | 125 | MPa | ISO 527-2 2 |
| Tensile Strain | ISO 527-2 | |||
| Break | 2.5 | 3.5 | % | |
| Break, 120°C | 4.0 | -- | % | |
| Break, 160°C | 4.0 | -- | % | |
| Tensile Strain (Break) | 2.5 | 3.5 | % | ISO 527-2 2 |
| Tensile Creep Modulus (1000 hr) | -- | 7500 | MPa | ISO 899-1 2 |
| Flexural Modulus | ISO 178 | |||
| -- | 11000 | 7300 | MPa | |
| 120°C | 6500 | -- | MPa | |
| 160°C | 5000 | -- | MPa | |
| Impact | Dry | Conditioned | Unit | Test Method |
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 10 | 10 | kJ/m² | |
| 23°C | 11 | 11 | kJ/m² | |
| Charpy notched impact strength (23°C) | 10.0 | 11.0 | kJ/m² | ISO 179/1eA 2 |
| Charpy notched impact strength (-30°C) | 9.00 | 9.00 | kJ/m² | ISO 179/1eA 2 |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 50 | 50 | kJ/m² | |
| 23°C | 60 | 60 | kJ/m² | |
| Charpy impact strength (23°C) | 50.0 | 60.0 | kJ/m² | ISO 179/1eU 2 |
| Charpy impact strength (-30°C) | 50.0 | 50.0 | kJ/m² | ISO 179/1eU 2 |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -40°C | 11 | 11 | kJ/m² | |
| 23°C | 11 | 11 | kJ/m² | |
| Thermal | Dry | Conditioned | Unit | Test Method |
| Deflection Temperature Under Load (0.45 MPa) | 290 | -- | °C | ISO 75-2 2 |
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 290 | -- | °C | ISO 75-2/A |
PA46荷蘭DSMTE200F6 通用注塑級
PA46荷蘭DSMTE250F3 通用注塑級
PA46荷蘭DSMTE250F6 通用注塑級
PA46荷蘭DSMTE250F9 通用注塑級
PA46荷蘭DSMTE351 通用注塑級
PA46荷蘭DSMTE373 通用注塑級
PA46荷蘭DSMTW200F3 通用注塑級 15%GF熱穩定性
PA46荷蘭DSMTW200F6 通用注塑級 30%GF熱穩定性
PA46荷蘭DSMTW200F8 通用注塑級 40%GF熱穩定性
PA46荷蘭DSMTW200FM33 BK 通用注塑級
PA46荷蘭DSMTW241F10 通用注塑級 50%GF熱穩定性
PA46荷蘭DSMTW241F10 BK 通用注塑級
PA46荷蘭DSMTW242FM10 通用注塑級 50%GF+ML
PA46荷蘭DSMTW271F6 通用注塑級 0.3