點擊圖片查看大圖8.7/15,12/20,26/36kV Silicon rubber full-cooling cable intermediate joint
產品特點Product feature
液體硅橡膠注射成型對電纜本體有恒定的收縮的收縮壓力，與電纜同"呼吸"局部放電最低。
采用防水絕緣膠帶恢復內外護層，密封可靠。
采用特殊"裝甲帶"外保護，安裝便捷。
適用于8.7/15kv 26/35kv橡塑絕緣電力電纜中間連接，可用于礦井，水下等惡劣環境。
Liquid silicon rubber injection moulding has constant cooling pressure to the cable .It is Low in electricity output while "breathing " together the cable .
Adopting waterproof insulating belt to make the protective layers is sealing .
Adopting special "armoured belt " outer protection is convenient to install .
It is suitable for the intermediate connection of model 8.7/15kV rubber insulating power cable to be operated in such bad environment of mine or under the water .
產品規格型號Product specification
三芯冷縮中間接頭
three-core cooling intermediate joint
| 電壓等級 Voltage grade |
型號 Type |
適用電纜截面 Fitforcable mm2 |
| 8.7/15kv | JLS-15/3.1 | 20-50 |
| JLS-15/3.2 | 70-120 | |
| JLS-15/3.3 | 150-240 | |
| JLS-15/3.4 | 300-400 | |
| 12/20(24)kV | JLS-20/3.1 | 20-50 |
| JLS-20/3.2 | 70-120 | |
| JLS-20/3.3 | 150-240 | |
| JLS-20/3.4 | 300-400 | |
| 26/35kv | JLS-35/3.1 | 50-95 |
| JLS-35/3.2 | 120-185 | |
| JLS-35/3.3 | 240-300 | |
| JLS-35/3.4 | 400-500 |
單芯冷縮中間
single-core cooling intermediate joint
| 電壓等級 Voltage grade |
型號 Type |
適用電纜截面 Fitforcable mm2 |
| 8.7/15kv | JLS-15/1.1 | 20-50 |
| JLS-15/1.2 | 70-120 | |
| JLS-15/1.3 | 150-240 | |
| JLS-15/1.4 | 300-400 | |
| 12/20(24)kV | JLS-20/1.1 | 20-50 |
| JLS-20/1.2 | 70-120 | |
| JLS-20/1.3 | 150-240 | |
| JLS-20/1.4 | 300-400 | |
| 26/35kv | JLS-35/1.1 | 50-95 |
| JLS-35/1.2 | 120-185 | |
| JLS-35/1.3 | 240-300 | |
| JLS-35/1.4 | 400-500 |